Hybrid – Ted Dangelmayer: Costly Controversial ESD Myths

Abstract: There are several common misunderstandings and controversies that can have significant impact on costs, quality and reliability of ESD programs. These misunderstandings or “myths” result in costly unnecessary expenditures and/or a compromise of the program integrity. These same myths are often cited by skeptics who do not fully understand the physics involved. Consequently, it is important to identify and dispel these myths. Latency is a significant reliability consideration that is surrounded with controversy. Some experts will argue that latency is virtually non-existent while others claim that it is the dominant failure mode. Join us for this highly interactive discussion and learn about Latency as well as common myths such as: Myth: ANSI/ESD S20.20 Is Sufficient For Class 0 Technologies Myth: HBM Failures Dominate ESD Failures Myth: Circuit Boards are Always Less Sensitive to ESD than Devices Myth: Airflow Causes Charging Myth: Humidity Control is Essential for ESD Myth: Fieldmeters Make Accurate Measurements on Machines Myth: Latency Failures Comprise 90% of ESD Failures Co-sponsored by: ESDA NE Chapter Speaker(s): Ted Dangelmayer Agenda: 5:30 PM Pizza, salad, soda, and Networking 6:00 PM Technical Presentation 6:45 PM Questions and Answers 7:00 PM Adjournment Bldg: Main Cafeteria, Lincoln Laboratory, 244 Wood St, Lexington, Massachusetts, United States, 02421, Virtual: https://events.vtools.ieee.org/m/438543